Home » Weidmuller
Authorised Australian Distributor — Weidmüller

Connectivity that keeps Australian panels running.

Terminate, switch, power and network the entire control panel from one trusted system — fewer suppliers, cleaner builds, connections that stay put. PUSH IN and screw terminals, RIDERSERIES relays, PROtop DC power, industrial Ethernet, surge protection and marking, stocked in Australia through TROPAC.
Shop Weidmüller range TALK TO A PAC
0.13–95mm² Conductor cross-section
PUSH IN Tool-free termination
IEC 60947 UL 1059 · CSA listed
IP20–IP67 Across the range
Australian stock QLD · NSW · VIC warehouses
Terminate & switch Terminals, relays, power & Ethernet
PUSH IN connection Tool-free, vibration-proof termination
PAC support Terminal selection & panel schedules
Find your solution

What are you building?

Start with the job in the panel — we'll point you to the right Weidmüller range.

Application
Terminate field and panel wiring on the DIN rail
A-series PUSH IN and screw terminal blocks — feed-through, ground, multi-tier, fused and disconnect — from 0.13 mm² control signals to 95 mm² power, with shared accessories and marking.
DIN-Rail Terminal Blocks (A / Z)
View range →
Application
Isolate and switch signals between PLC and field
RIDERSERIES and TERMSERIES general-purpose, solid-state and safety relays and couplers — slim DIN-rail interfaces that protect I/O and switch loads cleanly.
Relays & Optocouplers
View Range →
Application
Power the panel with stable, protected 24 V DC
PROtop and PROeco DC power supplies, DC/DC converters and UPS systems — reserve power and dynamic boost to ride through inrush and brief mains dips.
Power Supplies & UPS
View Range →
Application
Network devices across the plant floor
Managed and unmanaged industrial Ethernet switches, PoE switches, fibre and serial converters and routers — built for the temperatures and EMC of the factory.
Industrial Ethernet
VIEW SERIES →
Application
Protect instrumentation, data and solar from surges
VARITECTOR surge protection devices for signal, control, AC, DC and solar PV circuits — pluggable modules that divert transients before they reach equipment.
Surge Protection
View Range →
Not sure?
I need help configuring a panel solution
Our PACs can advise on terminal selection, relay and power sizing, network architecture, surge protection and marking — from a single terminal to a full panel schedule.
Free selection support
Talk to a PAC →
Product range

Circuit protection — MCB to ACB.

The full LS Electric protection stack — BKN-b MCBs for final sub-circuits, Susol MCCBs for sub-mains and distribution, Metasol ACBs for main bus and tie-breakers, MC contactors and MMS starters for motor circuits.

MCB
Miniature Circuit Breakers

For final-circuit protection in the panel — 1–125A in B/C/D curves, AC and DC variants. The panel-builder workhorse.

Range
1 – 125A (BKN-b · BKJ63N · BKH)
Poles
1P – 4P
Breaking
10kA @ 415V AC · 6kA @ 125V DC
Cert
IEC 60898-1 · IEC 60947-2
Shop MCB →
MC + TOR
Metasol Contactors & TOR

For switching and protecting motor loads — 6A to 2650A, Type 2 coordinated. One of the widest contactor families on the market.

Range
6A – 2650A (MC) · 0.1 – 800A (MT TOR)
Poles
3P / 4P
Coord
Type 2 tables with Susol & Metasol
Cert
IEC 60947-4
Shop MC + TOR →
ACB
Metasol ACB

For main-incomer and bus-tie duty to 6300AF — marine class on AS-F / AS-G.

Frame
630AF – 6300AF (AN-D · AS-D/E/F/G)
Poles
3P / 4P · draw-out or fixed
Breaking
65 – 120kA @ 415V
Cert
KS · KEMA · marine class (LR / ABS / DNV)
Shop ACB →
MMS
Manual Motor Starters

For DOL motor protection in one device — overload, short circuit and phase failure to 100A.

Range
0.1 – 100A (MMS-32D · 32S/H · 63H · 100H)
Trip
Overload · short circuit · phase fail (H)
Ops
100,000 mechanical
Cert
IEC 60947-2 + 60947-4
Shop MMS →
RCBO / RCCB
Residual Current Protection

For earth-leakage protection on AS/NZS 3000 sub-circuits — 10kA RCBOs and RCCBs.

Range
6 – 100A (RKS · RKS-b RCBO · RKN-b RCCB)
Poles
1P+N – 4P
Breaking
10kA · 30/100mA sensitivity
Cert
IEC 61009 · RCM
Shop RCBO / RCCB →
About LS Electric

Performance Certainty — an engineering standard, not a marketing claim.

LS Electric (formerly LS Industrial Systems) is one of Korea's largest electrical manufacturers with over 70 years of production history. Their Cheongju and Gumi factories build products to IEC standards that are certified by KEMA, CB, and marine classification bodies — third-party tested, not self-certified.

TROPAC has stocked LS Electric since the brand's introduction into the Australian market. When you need coordination data, trip-unit selection advice, or a direct line to the LS Electric technical team, our PACs handle it.

70+yrs
LS Electric manufacturing history
200kA
Max Susol breaking capacity
6300A
Largest Metasol ACB frame
3
TROPAC stocking locations(Australia-wide)
Watch LS Electric in action

Short videos from the LS Electric range.

Tap a card to play. Product walk-throughs, installation overviews, and coordination demonstrations.

Loading... 7:59
Susol MCCB
Series overview & trip-unit selection
Loading... 4:15
Metasol ACB
Draw-out frame walkthrough
Loading... 0:30
Motor control
MC contactor + MT TOR pairing
Ready to specify

Build your panel around protection you can prove.

LS Electric gives you data sheets, coordination tables and third-party certificates — not just a catalogue page. TROPAC holds stock and puts a PAC in front of you when the coordination gets complicated.

Shop LS Electric Talk to a PAC
Talk to a specialist

Need help specifying?

Send the team your application and a TROPAC Product Application Consultant will come back with the right LS Electric product, stock position and account pricing — usually same business day.

  • Selection & cross-reference from your current part numbers
  • Live stock check across QLD, NSW & VIC
  • Trade-account & project pricing
Enquiry · LS Electric
No obligation · usually same business day