TOPDRIVE VFD (EMC) ROZ1-K 3x10+3G1.5mm² Screened Flex Cable

TOPDRIVE VFD (EMC) ROZ1-K 3x10+3G1.5mm² Screened Flex Cable

The 3x10+3G1.5mm² formation suits mid-duty motor circuits on water treatment and HVAC plant — enough phase capacity for a typical 4–7.5kW drive while keeping the three symmetrically distributed earth conductors that cancel common-mode current back to the drive.

Features and Specifications

Standards (& Conformities): IEC 60502-1, IEC 60092-353, CE, RoHS.

Conductor:

Electrolytic annealed copper, class 5 flexible, to EN 60228 / IEC 60228.

Protective Conductor:

The earth is divided across three conductors distributed symmetrically in the interstices between the phase conductors, giving a balanced impedance path so common-mode currents cancel rather than returning through motor bearings.

Insulation:

Cross-linked polyethylene (XLPE) to IEC 60502-1, type HF XLPE 90°C to IEC 60092-360. XLPE's lower dielectric constant reduces capacitive coupling under the fast voltage transitions a variable frequency drive produces.

Screen:

Aluminium-polyester tape applied helically over the insulated conductors, with a tinned copper braid over the tape. Tape and braid act as a double screen with 100% coverage and a minimum total section of 10% of the phase conductor. A ripcord allows the outer sheath to be opened without damaging the screen.

Outer Sheath:

Polyolefin type ST8 to IEC 60502-1 and type SHF1 to IEC 60092-360, black. Low smoke zero halogen — low corrosive gas emission to IEC 60754-2 and light transmittance above 80% to IEC 61034.

Installation:

Fixed installations — open air, buried or in conduit. Minimum bending radius 10x cable diameter; impact resistance AG2 (medium severity); UV resistant to EN 50618; water resistance AD5 (jets).

Applications: Variable frequency drive motors and pumps, industrial facilities, and tunnels and enclosed infrastructure where low smoke zero halogen construction is mandatory. The 3C+3G symmetrical configuration with 100% double screen is the arrangement recommended by leading VFD manufacturers and the Gambica Association.

Note: Please choose product carefully. Product selection is the responsibility of the Purchaser. Refer to relevant Standards, project requirements and technical specifications to ensure that the product meets requirements.

TROAPC's standard warranty covers all products. A 5-year warranty applies to applicable IP Enclosures products. Refer to Refunds & Returns for more information.