maxGUARD Feed-in Module, 24VDC - AMG FIM-0

The Weidmüller maxGUARD AMG FIM-0 is the passive feed-in module that brings the 24 V DC supply onto the maxGUARD main current bars, rated for up to 40 A of station current. It carries no signalling of its own — no alarm output, no reset input and no connection to the internal signal line — so it suits assemblies where status is read locally at each ELM channel or handled by a separate AMG AM or AMG CM. Specify the AMG FIM-C instead if you need reset and collective alarm built into the feed-in point.

• Function: Passive feed-in module, supplies 24 V DC to the maxGUARD main current bars
• Rated current: 40 A
• Supply voltage: 24 V DC, range 18…30 V DC
• Max. residual ripple: 100 mVpp
• Signalling: None — no signal contacts, alarm output, reset input or bus interface
• Input terminals: 2 (+, −)
• Connection system: PUSH IN
• Conductor cross-section: 0.75…16 mm² flexible, 0.75…10 mm² rigid
• Width: 12.2 mm
• Dimensions (W x H x D): 12.2 mm x 125 mm x 96.5 mm
• Weight: 65 g
• Operating temperature: −25 °C to +70 °C
• Storage temperature: −40 °C to +85 °C
• Protection degree: IP20
• Overvoltage category: III
• Approvals: cULus (file E258476), RoHS compliant
• Order number: 2081870000

TROAPC's standard warranty covers all products. A 5-year warranty applies to applicable IP Enclosures products. Refer to Refunds & Returns for more information.